10kV-35kV Amorphous Alloy Transformer
Hai domande? I rappresentanti di vendita GNEE sono disponibili per la chat dal vivo ora
Invia e-mail:sales@gneeelectric.com
Tel:+8615824687445
The thickness of amorphous alloy strip is 0.02~0.03mm, which is about 1/10 of silicon steel sheet. Therefore, 10kv-35kv amorphous alloy transformers' eddy current loss is very small, and the no-load loss and no-load current are very low. The energy-saving effect is significant, the operating cost is low, and the comprehensive benefits are good.
Based on the selection and use of the distribution power transformer, which are similar to conventional silicon steel sheet transformers, they do not cause any inconvenience and do not require additional training for operators. The oil filled transformers are widely used in urban areas, rural power grids, wind power industry, solar energy industry, and national key projects.
|
Power Transformer, Oil-Immersed Transformer |
|||
|
50Hz, 60Hz |
|||
|
S11-M |
Other, 10kV, 69kV, 110kV, 132kV, 220kV, 115kV, 22KV, 35kV |
||
|
440V, 480V, 11kV, Other |
|||
|
35- 38.5 kv,10kv,20kv as customized |
±2X2.5% |
||
|
0.4kv as customized |
500kVA~240MVA as customized |
||
1. Low loss: The iron core is made of high permeability amorphous alloy material and has a three-phase five column iron core structure. The no-load loss is reduced by more than 60% compared to products made of silicon steel sheets.
2. Low noise: The product's noise level is 3-5 decibels lower than the national standard.
3. High mechanical strength: The high and low voltage coils adopt a rectangular structure, the low voltage coils are wound with copper foil, and the high and low voltage coils are wound together using a horizontal assembly process to ensure that the amorphous iron core is not damaged during assembly. The insulation of the upper and lower iron yokes of the body adopts a connected structure. High mechanical strength and strong short-circuit resistance.
4. Maintenance free: The amorphous alloy transformer adopts a maintenance free structure and process, and there is no need to inspect the cover during on-site installation. All accessories are pre installed in the factory. Product maintenance is simple and convenient.
Etichetta sexy: 10kv-35kv amorphous alloy transformer, China 10kv-35kv amorphous alloy transformer manufacturers, suppliers, factory, Transformers amorfo, trasformatore economico, trasformatore per lenti illuminanti, trasformatore per gli scudi di illuminazione, trasformatore per illuminazione esterna, Transformer for UPS Systems
You Might Also Like
Trasformatore di potenza immerso in olio da 110 kV
Trasformatore di distribuzione trifase a bagno d'oli...
Trasformatore di distribuzione immerso in olio a bas...
1000kVA 400V 230V Transformer con olio trifase ad al...
Trasformatore di potenza immerso a tre fasi da 50kVA
150 KVA Transformers immessi di olio
Invia la tua richiesta

















